Model: TD640
Brand: TESTEX
Laboratory Thermosl Range is used for working out dye formulas and for research work. The working process is:
Continuous one-cycle thermosoling process padding – Infrared Pre-heater – Intermediate Dryer – Thermosoling.
The fabric samples padded by the horizontal pneumatic type padder are held on both ends by special clip bars. This complete sample holder is mounted on the chains which are running endlessly through the machine.
The fabric sample is firstly led through the infrared pre-heater, then the intermediate dryer and finally the thermosoling zone. After testing, the sample is taken off automatically from the carrying chains and dropped down into the fabric receiver.
Specifications
Horizontal padder
- Roller size Dia. 125mm x 300mm
- Made of NBR rubber with 70o +/- 3 shore hardness
- Pressure 0.1 ~ 0.5mPa, 2 pressure gauges
- Chemical trough capacity 500ml
- Air reducing valve, Air pressure gauge, Air filter, shower device
Thermosoling chamber
- Thermosoling distance 1500mm
- Auto Temp. control Max 250℃ with accuracy within +/- 1%
- Power 3 phase, 1 kW.
- One circulating fan with various speeds 1HP / 3 phase
Infrared heating system
- 12 reflect-type IR heaters
- Electrical capacity 3 phase, 4.8 kW
- Heating distance 900mm
- Reflection distance 70 ~ 120 mm can be adjusted
Dryer
- Drying distance 1800mm
- Temp. Controlling Automatic temp. control between 100 ~ 180℃ (Adjustable)
- Power 3 phase 10 kW heating
- One circulating fan with various speeds 1HP / 3 phase
Steamer
- Temp. Max 103℃.
- Steam Max 0.5mPa
- Steaming Max 6 m, speed control 20 ~ 120 s adjustable inside the steaming chamber
- All guide rollers inside the chamber is Teflon-coated
- Water sealing bath at the outlet for automatic cooling control
- Both steam inlet pipe and water inlet pipe size 1/2 inch are supplied by user
Power
3 phase 380 V 50 Hz 28 kW |
Weight
1000 kg |
Dimensions
2500 x 1250 x 3030 mm (L x W x H) |